Toll Free 1-800-428-1416
227 West Maple Ave
Monrovia, Ca 91016
S88X DUAL OUTPUT SQUARE PULSE STIMULATOR
Single, Repetitive and Train Outputs, TTL Synchronization
NEW — The S88X is a dual output, general purpose stimulator for nerve and muscle stimulation procedures. This new stimulator has touch-pad controls.
Applications extend from single cell to entire muscle stimulation. The two output channels can be operated independently or synchronized to produce complex paradigms. The outputs are non-isolated constant voltage monophasic, biphasic or twin pulses. Up to 9 sets of parameters can be saved for future use.
New features include:
• Digital controls – precise timing accuracy
• Bright display simplifies setup
• Independent or synchronous channel operation
• Monophasic and biphasic modes
• Dual train output
• High current output facilitates field stimulation
• New companion isolation units
• Software replacement via USB cable
| SPECIFICATIONS | ||
| Train Rate (S1 and S2) |
1/100 sec to 99 TPS | |
| Train Duration | 1 msec to 99 sec | |
| Rate (S1 and S2) | 1/100 sec to 1000 PPS | |
| Pulse Delay (S1 and S2) |
10 µsec to 99 sec | |
| Pulse Duration (S1 and S2) |
10 µsec to 99 sec | |
| Synchronous Outputs (TTL) | S1, S2, S1 Delay, S2 Delay, Train; Front panel BNC connectors, 50 ohm, 10 µsec pulses, can source/sink 20 mA peak |
|
| Synchronous Inputs (TTL) | Train Duration, S1 Delay, S2 Delay; Front panel BNC connectors, 4.75 kohm pullup to 5 volts |
|
| Stimulus Output | 250 mV to 24 VDC (monophasic) ±250 mV to ±12 VDC (biphasic) |
|
| Peak Output Current | 1 A | |
| Output Protection | Yes, current limited | |
| Output Impedance | <2 ohms | |
| Maximum Power Out | 24 W peak | |
| AC Power | 115/230 volts, 50/60 Hz, 100 watts maximum | |
| Physical Size | 19" W x 5.25" H x 12.5" D (48.3 cm x 13.4 cm x 31.8 cm) |
|
| Weight | 10 lbs. (4.5 kg) | |
| Regulatory | Safety: EN 61010-1:2001, UL 61010A-1, CSA C22.2 No. 1010.1-92 EMC: FCC Part 15, Subpart B, Class B, EN 61326:1998 Class B |
|
