The S88X is a dual output, general purpose stimulator for nerve and muscle stimulation procedures.
This new stimulator has touch-pad controls.

 

 

Applications extend from single cell to entire muscle stimulation. The two output channels can be operated independently or synchronized to produce complex paradigms. The outputs are non-isolated constant voltage monophasic, biphasic or twin pulses. Up to 9 sets of parameters can be saved for future use.

New features include:
• Digital controls – precise timing accuracy
• Bright display simplifies setup
• Independent or synchronous channel operation
• Monophasic and biphasic modes
• Dual train output
• High current output facilitates field stimulation
• New companion isolation units
• Software replacement via USB cable

 

Train Rate (S1 and S2)		1/100 sec to 99 TPS
Train Duration		1 msec to 99 sec
Rate (S1 and S2)		1/100 sec to 1000 PPS
Pulse Delay (S1 and S2)		10 µsec to 99 sec
Pulse Duration (S1 and S2)		10 µsec to 99 sec
Synchronous Outputs (TTL)		S1, S2, S1 Delay, S2 Delay, Train; Front panel BNC connectors, 50 ohm, 10 µsec pulses, can source/sink 20 mA peak
Synchronous Inputs (TTL)		Train Duration, S1 Delay, S2 Delay; Front panel BNC connectors, 4.75 kohm pullup to 5 volts
Stimulus Output		250 mV to 24 VDC (monophasic) ±250 mV to ±12 VDC (biphasic)
Peak Output Current		1 A
Output Protection		Yes, current limited
Output Impedance		<2 ohms
Maximum Power Out		24 W peak
AC Power		115/230 volts, 50/60 Hz, 100 watts maximum
Physical Size		19" W x 5.25" H x 12.5" D (48.3 cm x 13.4 cm x 31.8 cm)
Weight		10 lbs. (4.5 kg)
Regulatory		Safety: EN 61010-1:2001, UL 61010A-1, CSA C22.2 No. 1010.1-92 EMC: FCC Part 15, Subpart B, Class B, EN 61326:1998 Class B